Hanna Instruments HI-700671P Cleaning and Disinfection Solution for Algae, Fungi and Bacteria

In many applications, electrodes become dirty while being used, resulting in negative results on their efficiency. Since this dirt is not removed during normal use, special cleaning solutions are recommended and we have a great selection specific to your application here at Hanna.

The single dose sachets are really handy with each sealed sachet holding just the right amount of solution. Each time a meter or electrode is cleaned using the Hanna sachets, it is like using a newly opened bottle of solution!

Electrodes become dirty from use and will produce inaccurate results even if they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues which are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly.

At Hanna, we suggest cleaning the bulb and junction of your electrode on a regular basis in our ready-to-use cleaning solutions to ensure that the probe is always clean and to prevent any clogging of the junction.

All cleaning solutions are packaged in an air tight bottle with tamper-proof seal to ensure quality and freshness. All solutions show a batch number and expiry date.

Available in 230ml and 500ml bottles, and individual 20ml sachets in packs of 25.

Useful tips:

• After cleaning, rinse the electrode in tap water and then place in a Hanna Storage Solution before calibrating or taking measurements.
• Always follow up with a Hanna Buffer/calibrating Solution for the best results.

Remember:

• Cleaning is a fast and effective routine which should be performed on a regular basis as a preventative measure against using dirty equipment.
• Always clean the junction and bulb of the electrode
• Always clean your meter, electrode or probe before calibration
• The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, modern pH meters assume that the electrode is clean and will give you a starting point accordingly. So, if you haven’t cleaned your meter, your readings will be inaccurate from the start.

All ready-to-use cleaning solutions are made with the highest quality of materials and chemicals complying with standards set by the National Institute of Standards and Technology (NIST), to ensure quality and accuracy. Also available in light blocking bottles to prevent against degradation by UV light compatible with FDA Standards (US Food and Drug Administration).