Hanna Instruments-9934-2 Hydroponics Wall Mounted TDS Controller

Hanna InstrumentsSKU: HI-9934-2
filler

Price:
Sale price£656.50
Excluding VAT

Shipping calculated at checkout

Stock:
Re-stocking soon

Description

Hydroponics wall-mount Total Dissolved Solids controller with proportional setting.

This wall mounted meter controls TDS in the 0 to 1999 ppm (mg/L) range through a single set point for dosage of fertilizers. The proportional control can be fine tuned through the time cycle between 0 to 90 seconds and the proportional band from 0 to 400 ppm.


Coarse and fine as well as a slope trimmer make for an accurate setting and calibration. A pump or electro-valve can be powered through the terminal. In addition to the set point relay.


Hanna Instruments-9934 also provides for an alarm relay. The alarm is activated when the measurements exceed the set point by a user-selectable margin in the 50 to 450 ppm range. The alarm also goes off due to a malfunction, the continuous dosing time exceeds the operator adjustable period of 1 to 10 minutes. The alarm can be configured in either normally-closed or normally-open position and turned off during maintenance.


HI 9934 also provides an isolated output signal which is user selectable between 0-20 or 4-20 mA.


HANNA 4-ring TDS probes with incorporated temperature sensor and DIN connector can be quickly attached to the controller. Readings are automatically compensated for temperature variations in the 0 to 50°C (32 to 122°F) range.


The extractable terminal wiring is through the side of the meter with washers and grommets. The compartment containing the connections is closed behind a fire-retardant ABS panel.

Payment & Security

Payment methods

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

You may also like

Recently viewed